TA2 (Grade 2) Titanium Plate

TA2 Grade 2 Titanium Plate is the most widely used commercially pure (CP) titanium grade, balancing strength, weldability and corrosion resistance. In annealed condition it delivers 345 MPa tensile strength, 275 MPa yield strength and 20% elongation, making it a fit for chemical, marine and architectural use. Sizes: 0.3-30mm thick, up to 1500x3000mm. Surface finish: No.1 / 2B / Mirror. Standards: ASTM B265 Gr.2; EN 3.7035; GB TA2; UNS R50400. Custom sizes, mill certs and fast export quotes available from Dilisteel.

Product Specifications

BASIC PROPERTIES

PERFORMANCE SPECIFICATIONS

COMMON APPLICATIONS

High‑strength titanium alloy for aerospace fastener components

Aerospace parts

Landing gear, wing rib

Medical implants

Joint, bone plate, dental implant

Corrosion‑resistant titanium alloy for industrial chemical equipment

Chemical corrosion-resistant equipment

Heat exchanger, pump & valve

Light‑weight titanium alloy used in consumer goods and hand tools

High-end consumer parts

Bike frame, watch case, golf head

Quality Inspection & Certifications

⚙️

Tensile Test

🔍

Hardness Test

💧

Corrosion Test

📏

Dimension Test

🧪

Chemical Analysis

📊

Elongation Test

TA2 (Grade 2) Titanium Welded Pipe

TA2 Grade 2 Titanium Welded Pipe is a cost-effective commercially pure (CP) titanium welded pipe. In annealed condition it delivers 345 MPa tensile strength, 275 MPa yield strength and 20% elongation, making it a fit for large-diameter piping systems in desalination, chemical processing and power plant condensers. Sizes: OD 10-600mm, wall 1-10mm. Surface finish: Pickled / Bright Annealed. Standards: ASTM B862 Gr.2; EN 3.7035; GB TA2; UNS R50400. Custom sizes, mill certs and fast export quotes available from Dilisteel.

TA1 (Grade 1) Titanium Sheet

Commercially pure titanium, highest formability and corrosion resistance

TA9 (Grade 7) Titanium Plate

TA9 Grade 7 Titanium Plate is a palladium-alloyed commercially pure (CP) titanium with enhanced crevice corrosion resistance. In annealed condition it delivers 345 MPa tensile strength, 275 MPa yield strength and 20% elongation, making it a fit for harsh chemical processing service. Sizes: 0.5-30mm thick, up to 1500x3000mm. Surface finish: No.1 / 2B / Mirror. Standards: ASTM B265 Gr.7; EN 3.7235; GB TA9; UNS R52400. Custom sizes, mill certs and fast export quotes available from Dilisteel.

TA7 (Grade 6) Titanium Round Bar

TA7 Grade 6 Titanium Round Bar is an alpha titanium alloy with stable strength at elevated temperature. In annealed condition it delivers 790 MPa tensile strength, 760 MPa yield strength and 10% elongation, making it a fit for airframe and jet engine casings. Sizes: 3-250mm dia. Surface finish: Black / Turned / Ground. Standards: ASTM B348 Gr.6; EN 3.7115; GB TA7; UNS R54520. Custom sizes, mill certs and fast export quotes available from Dilisteel.

TA4 (Grade 4) Titanium Round Bar

TA4 Grade 4 Titanium Round Bar is the highest-strength commercially pure (CP) titanium grade. In annealed condition it delivers 550 MPa tensile strength, 483 MPa yield strength and 15% elongation, making it a fit for demanding structural applications. Sizes: 3-300mm dia. Surface finish: Black / Turned / Polished. Standards: ASTM B348 Gr.4; EN 3.7065; GB TA4; UNS R50700. Custom sizes, mill certs and fast export quotes available from Dilisteel.

TA18 (Grade 9) Titanium Seamless Tube

TA18 Grade 9 Titanium Seamless Tube is a moderate-strength, cold-formable titanium alloy tube. In annealed condition it delivers 620 MPa tensile strength, 483 MPa yield strength and 15% elongation, making it a fit for aerospace hydraulic lines and tubing. Sizes: OD 6-76mm, wall 0.5-5mm. Surface finish: Pickled / Bright Annealed. Standards: ASTM B338 Gr.9; EN 3.7195; GB TA18; UNS R56320. Custom sizes, mill certs and fast export quotes available from Dilisteel.

Request a Quotation

One-on-one consultation with our engineers. Dedicated specialist response within 24 hours.