400 Monel Strip Coil

Supplied annealed. bright / rolled surface finish; good mechanical properties from sub-zero to about 480 C, with high thermal conductivity of 218 W/m-K.

Product Specifications

BASIC PROPERTIES

PERFORMANCE SPECIFICATIONS

COMMON APPLICATIONS

Nickel‑based alloy components for aero engine manufacturing

Aero-engine & turbine parts

Blade, combustion chamber

High‑strength nickel‑based alloy used in nuclear industry facilities

Nuclear & petrochemical equipment

Furnace tube, reactor internals

Nickel‑based alloy for heavy‑duty corrosion‑resistant equipment

Chemical anti-corrosion pipe & valve

Strong acid condition parts

High-performance exhaust system

Turbine housing, exhaust pipe

Quality Inspection & Certifications

⚙️

Tensile Test

🔍

Hardness Test

💧

Corrosion Test

📏

Dimension Test

🧪

Chemical Analysis

📊

Elongation Test

600 Inconel Tube

Supplied annealed. mill / bright annealed surface finish; standard nickel-chromium alloy with excellent resistance to oxidation and carburizing up to 1175 C. Ideal for heat exchangers & process piping.

400 Monel Round Bar

Supplied annealed. bright / cold drawn surface finish; naturally resistant to chloride stress-corrosion cracking, widely used in marine valves, pump shafts and marine hardware. Ideal for shafts, fasteners & precision machined parts.

400 Monel Tube

Supplied annealed. mill / bright annealed surface finish; nickel-copper solid-solution alloy with outstanding resistance to seawater and hydrofluoric acid at 880 g/cm3. Ideal for heat exchangers & process piping.

400 Monel Wire

Supplied annealed. bright / soft surface finish; naturally resistant to chloride stress-corrosion cracking, widely used in marine valves, pump shafts and marine hardware. Ideal for screening, welding & fasteners.

400 Monel Plate

Supplied annealed. mill / polished surface finish; good mechanical properties from sub-zero to about 480 C, with high thermal conductivity of 218 W/m-K. Ideal for pressure vessels & chemical processing equipment.

400 Monel Forged Part

Supplied annealed. as forged / machined surface finish; nickel-copper solid-solution alloy with outstanding resistance to seawater and hydrofluoric acid at 880 g/cm3. Ideal for forged components, flanges & rings.

Request a Quotation

One-on-one consultation with our engineers. Dedicated specialist response within 24 hours.